NISSAN 2009 Cube User Manual
Page 7

HEADLIGHT AND TURN SIGNAL CONTROL
HEADLIGHT CONTROL SWITCH
Ⅲ Turn the headlight control switch
to the
position to turn on the front parking, tail, license plate
and instrument panel lights.
Ⅲ Turn the headlight control switch
to the
posi-
tion to turn on the headlights. All other lights remain on.
FOG LIGHT OPERATION (if so equipped)
NOTE: The headlights must be on and the low beams selected for the fog lights to operate.
Ⅲ Turn the switch (inside collar)
to the
position to turn on the fog lights.
Ⅲ Turn the switch (inside collar)
to the OFF position to turn off the fog lights.
HIGH BEAM
Ⅲ Push the headlight control switch forward
to
select the high beam function. The blue
indi-
cator light illuminates. Pull the headlight switch
back to the original position to select the low beam.
The blue
indicator light goes off.
Ⅲ Pull and release the headlight control switch
to flash the headlight high beams on
and off.
STEERING WHEEL SWITCHES FOR AUDIO CONTROL/
BLUETOOTH
ா (if so equipped)
Ⅲ Press the SOURCE button to turn the audio system on.
Ⅲ To choose AM, FM, XMா (if so equipped), CD or AUX, press
SOURCE repeatedly.
Ⅲ The tuning switches
and
can be used to perform the
following:
● Push the
or
switch for less than 1.5 seconds to
change the next radio preset in memory.
● Push and hold the
or
switch for more than 1.5
seconds to seek the next or previous broadcasting radio station.
● Push the
or
switch while playing a CD for less than 1.5 seconds to change
tracks on the CD.
Ⅲ Push the
volume control switch to increase the volume. Push the
volume
control switch to decrease the volume.
5