Nokia 2126 - Manual (Page 47)

S e t t i n g s
46
Phone lock
The Phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone lock is
enabled,
Phone locked is displayed each time you turn your phone on.
1. In the standby mode, select Menu > Settings > Security settings >
Access Codes > Phone lock .
2. Enter the lock code, and select OK . See "Change lock code," p. 46.
3. Select On or Off .
If you selected On , each time you power on your phone you must enter your lock
code and the lock code must be accepted before the phone will function normally.
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programed into your phone (for example, 911) and the
number stored in the
Allowed number when phone locked location.
To store an allowed number, do the following:
1. In the standby mode, select Menu > Settings > Security settings >
Access Codes. > Allowed number when phone locked .
2. Enter the lock code and select OK . See "Change lock code," p. 46.
3. Enter the phone number, and select OK .
Call an allowed phone number
In the standby mode, enter an allowed number and press the call key.
Change lock code
When you change your lock code, ensure that you store it in a safe place, away
from your phone. Avoid entering access codes similar to emergency numbers
such as 911 to prevent accidental dialing of the emergency number.
The preset lock code is 1234. If you enter an incorrect lock code five times in a
row, your phone will prompt you for the 5-digit security code. If you enter the
wrong security code five times in succession, you will not be able to enter a code
for 5 minutes, even if you power off the phone between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings >
Access Codes. > Change lock code .
2. Enter the current (or default) lock code, and select OK .
3. Enter the new lock code (must be 4 characters in length), and select OK .
4. Reenter the new lock code for verification, and select OK .