Philips MCB146 - Manual (Page 8)

English
8
Preparations
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Inserting batteries into the
Remote Control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries (not supplied)
following the indications (+/-) inside the
compartment.
3
Close the cover.
3
1
2
Using the Remote Control to
operate the system
1
Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
2
Do not put any objects between the Remote
Control and the system while operating the
system.
CAUTION!
– Remove batteries if they are
exhausted or if the Remote Control is
not being used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
MCB146_05_Eng_ASDA 4/2/10, 15:05 8