Product overview, Indoor unit, Indoor unit outdoor unit outdoor unit – Panasonic CS-E21FKR User Manual
Page 4: Remote control, Air inlet, Air outlet air inlet, About, Transmitter clock setting check
4
Troubleshooting
TIMER
ON
1
2
3
OFF
SET
CANCEL
AC
RC
SET
CLOCK
CHECK
RESET
TIMER
ON
1
2
3
OFF
SET
CANCEL
AC
RC
SET
CLOCK
CHECK
RESET
PRODUCT OVERVIEW
Indoor Unit
Indoor Unit
Outdoor Unit
Outdoor Unit
Air inlet
(rear)
Air outlet
Air inlet
(side)
■
About
6. Press again.
• Timer operation will be based on
current time set.
• The batteries can be used for
approximately 1 year.
Remote Control Preparation
3. Close the cover.
• Make sure it is not obstructed.
• Maximum distances : 10m.
• Certain fluorescent lights may
interfere with signal transmission.
Please consult your nearest dealer.
Remote Control Signal
1. Pull out
the cover.
2. Insert AAA or R03
batteries.
5. Press to
set time.
2
SET
CL
ER
4. Press CLOCK.
Auto OFF/ON Button
Action
Mode
Press once.
Automatic
Press and hold until
you hear one beep,
then release.
Cooling
Press until you hear
one beep then release.
Press again until you
hear two beeps then
release.
Heating
• To turn off, press the AUTO OFF/
ON button again.
● In the event of an error, the unit will stop and the timer indicator will blink.
2. Press until you hear beep
sound, then jot down the
error code.
Notes:
• The unit may be operable (with 4 beeps)
on a limited basis, depending on the error.
FF
SET
3. Press for 5 seconds to quit
checking.
4. Turn the unit off and reveal the
error code to your nearest dealer.
CA
1. Press for 5 seconds.
Air intake
Airflow direction
louver
Air filter
Front panel
Supersonic air
purifying device
Auto OFF/ON
button
Receiver
Discharged air
Indicator
AUTO
HEAT
FAN
SPEED
AIR
SWING
COOL
DRY
TEMP
AIR SWING
FAN SPEED
QUIET
POWERFUL
TIMER
ON
1
2
3
OFF
SET
CANCEL
MODE
OFF/ON
AC
RC
SET
CLOCK
CHECK
RESET
LCD display
Off/On
Fan speed selection
Temperature setting
Powerful operation
Operation mode
Quiet operation
Timer setting
Airflow direction
adjustment
Remote Control
Remote Control
Transmitter
Clock setting
Check
* For normal operation, the
and
reset buttons are not in use.
* Press
reset to restore the remote control’s default setting.