Planet Technology ADP-8301 - Manual (Page 7)

3
Chapter 2
Installation
Hardware Installation
1. Make sure that your computer is switched off. Unplug the power cord from the
wall socket. Also turn off all other peripherals you may have attached to your
computer. Remove your computer cover
2. Select a free PCI slot. Remove the cover from the slot. Keep the screw. You will
be using it in the next step.
3. Carefully slide the ADSL modem into the chosen slot. Press firmly on the top of
the modem to seat it. Fasten the modem to your system with the screw you re-
moved in the previous step. Replace the computer over.
4. Plug one end of the phone cable into the Line jack on your ADSL modem. The
other end of the phone cable should be connected directly to the phone outlet.
5. Turn on your computer.
6. The
“Add New Hardware Wizard” will be displayed. Insert the driver CD and click
Next.
7. Choose the
“Search for the best driver for your device (Recommended)” and
click Next.
8. Select the
“CD-ROM drive”, and “Specify a location” and click Browse. Then,
specify the path which ADSL modem connected your computer to Internet, then
click OK.
Driver Installation for both LAN and WAN mode with
Win 98
1. The
“Add New Hardware Wizard” will be displayed .Click Next.
2