Pioneer TAD M600 - Manual (Page 15)

15
TAD-M600
TROUBLESHOOTINg
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components
and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your
dealer.
Symptom Possible cause Remedy
Power does not turn
on. The power plug is not connected to the '
power outlet.
The power cord is not connected to the AC
'
IN connector of the TAD-M600.
Firmly plug in the power cord to the power '
outlet.
Firmly plug in the power cord to the AC IN
'
connector.
No sound output. The speaker cable is disconnected or is not '
connected correctly.
The terminal or the speaker cable plug is
'
dirty.
The power indicator light is red.
'
Firmly connect the speaker cable. '
Clean the terminal and plug. '
Refer to ' Protection circuit on page 14 and
eliminate the cause.