PYLE Audio PLPK65TVD - Manual (Page 45)

For System
The following suggestions help you care for the product so that you can enjoy it for
years.
1. Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.
2. Keep the product away from dust and dirt, which can cause premature wear of parts.
3. Handle the product gently and carefully. Dropping it can damage circuit boards and
cases, and can cause the product to work improperly.
4. Wipe the product with a dampened cloth occasionally to keep it looking new. Do not
use harsh chemicals, cleaning solvents, or strong detergents to clean the product.
5. Use and store the product only in normal temperature environments. High
temperature can shorten the life of electronic devices, damage batteries, and distort
or melt plastic parts.
13
TROUBLE SHOOTING
For Tape Player
Periodic cleaning of the tape head and capstan shaft will ensure good reproduction of
music and trouble-free operation. Cleaning of the tape head should be done every 20
to 30 hours of operation or when the high tones have become less clear.
1. Use a cassette-cleaning cartridge if available. If one is not available, use a cotton
swab soaked in isopropyl rubbing alcohol.
2. While holding the tape door open, locate tape head to the right of the opening and in
the centre of the unit.
3 Clean the tape head with the cotton swab.
4. Clean the capstans and the pinch rollers with the cotton swab.
5. Allow the tape head, capstans and pinch rollers to dry before operating.
6. Do not touch the tape with your fingers, if it becomes lose, wind it back by twisting a
six-sided pencil in the cassette reel.