Connecting the system, Caution – Pioneer AVD-W6010 User Manual

Page 23

ENGLISH

ESPA

DEUTSCH

FRAN

AIS

ITALIANO

NEDERLANDS

Connecting the System

CAUTION

• PIONEER does not recommend that you install or service your display your-

self. Installing or servicing the product may expose you to risk of electric
shock or other hazards. Refer all installation and servicing of your display to
authorized Pioneer service personnel.

• Secure all wiring with cable clamps or electrical tape. Do not allow any bare

wiring to remain exposed.

• Do not drill a hole into the engine compartment to connect the yellow lead of

the unit to the vehicle battery. Engine vibration may eventually cause the
insulation to fail at the point where the wire passes from the passenger com-
partment into the engine compartment. Take extra care in securing the wire
at this point.

• It is extremely dangerous to allow the display lead to become wound around

the steering column or gearshift. Be sure to install the display in such a way
that it will not obstruct driving.

• Make sure that wires will not interfere with moving parts of the vehicle, such

as the gearshift, parking brake or seat sliding mechanism.

• Do not shorten any leads. If you do, the protection circuit may fail to work

properly.