Philips CDR570/00 - Manual (Page 21)

English
21
1 Press SHUFFLE on the remote control before or during CD
play to start shuffle play.
➜ The tracks on the CD (or program if set) play in random
order.
2 Press SHUFFLE on the remote control again to return to
normal CD play.
Note: Shuffle is also cleared if you open the disc tray.
1 Press REPEAT on the remote control one or more times
during CD play.
➜ When
REPEAT TRACK lights up, the current track plays
repeatedly. When REPEAT ALL lights up, the disc or
program plays repeatedly.
2 To return to normal play, press REPEAT on the remote
control one or more times until:
➜ The
REPEAT label disappears from the display.
Note:
- You can use shuffle in combination with
REPEAT ALL or
programmed play.
- REPEAT is also cleared if you open the disc tray.
• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track ( STEP ).
Programming
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
➜
PROGRAM flashes and PROGRAM appears on the display.
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks ( STEPS ) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROG(ram) on the remote control to end
programming.
➜
PROGRAM lights continuously.
5 Press PLAY/PAUSE 2 ; to start programmed play.
Note:
- To review the program, press PROG(ram) on the remote
control, followed by 5 or 6 with the CD recorder in Stop
mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks,
PROG FULL
appears on the display.
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
2 7 8 11
DIGITAL
OPTICAL
ANALOG
I
I CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
1 2 3 4 5 6 7 8 9 10 11
Remarks about programming
DIGITAL
OPTICAL
ANALOG
I
I CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
1 2 3 4 5 6 7 8
Repeat CD, track or program
Shuffle (random order) play
PLAYING PROGRAMMING