Peavey PFC 10 - Manual (Page 8)

PFC'" 10 Professional MIDI Foot Controller
7.0 USING THE CONTROLLER AS A STAND-ALONE MIDI CONTROLLER
All messages transmitted by the Professional MIDI Foot Controller are standard MIDI messages.
When used with a standard, MIDI DIN cable, the controller will transmit Program and CV messages.
Each timeyouturnthe need to MIDI channelthatthefoot controller
will transmit on. The following message will appear:
M I D I
Select the appropriate channel by pressing the numeric buttons.
The PFC 10 Professional MIDI Foot Controller sends MIDI Program Change messages in the Program
Change mode. Programs are arranged in ten banks often programs as previously described.
For example: If you are currently on program 4 and wish to change to program 58, press the Bank/
Tuner button once and then press the 5th numeric button for Bank 5. As soon as you press the 8, Program
Change 58istransmitted. press 3, Program Change 53 will will show the
active program number and the display willshowthe as follows:
M O D E :
5 3
8.0 MIDI IMPLEMENTATION
MIDI Channel: 1-16 user selectable in STAND-ALONE used with Tube Fex
or 212.
Peavey Electronics Corporation