Peavey PFC 10 - Manual (Page 5)

10 Professional MIDI Foot Controller
View Control
Angle Remote Voltage
Adjust
4.0 REAR PANEL DESCRIPTIONS
1. Power Supply
Required when using a
MIDI
cablewith otherthan
Use the
16-16.5
volt AC 1,000 adaptor, Peavey available as an option.
Caution: Use only the optional16.5 volt power supply for this product. If the (optional) power supply must
be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure
to use the correctpowersupply could
performance, and/or non-operation.
2. View Angle Adjustment
This adjusts the view angle of the LCD display to provide the most comfortable viewing angle.
3. MIDI/Remote Out Jack
Used when connecting to an effects unit. Use a standard MIDI cable with effects units other
than the Peavey Tube or 212. When using the Tube Fex or use the
MIDI cable you to Foot Controller’s "intelligent"
operation, and it will connect the PFC 10 to the Phantom power supplied from the Tube Fex or
212.
4.
Control Voltage Jacks
The Controller 6 when used with a CV pedal or potentiometer. Use the
transmit Controller 7 (volume) when used with a CV pedal or potentiometer.
Peavey Electronics Corporation