Pride Mobility PRIDE LX12 - Manual (Page 21)

21 AUS Pride LX Series/RevC/Apr03
After you have used your Pride LX for an extended period of time, you may find the need to make some adjustments
to increase your comfort. You can change the armrest height, the swing-away footrest length, the controller position,
or the seatback height.
WARNING! If your power chair was configured at your authorised Pride Provider, please consult your
healthcare professional before changing the seat position or making any other adjustment. Some
adjustments may degrade your power chair’s performance and safety by changing its center of gravity.
Armrest Height
You can change the armrest height in 2.54-cm. increments. There
are five different heights.
To change the armrest height:
1. Pull out the armrest lever to release the armrest. See figure 20.
2. Move the armrest up or down.
3. Release the armrest lever to lock the armrest.
Swing-away Footrest Length
You can change the footrest length in 2.54-cm increments.
To change the footrest length:
1. Use a 6-mm hex key to loosen the footrest setscrew. See
figure 21.
2. Slide the footrest up or down to the desired length.
3. Tighten the 6-mm setscew.
4. Repeat for the other side.
Controller Position
You may change the position of the controller by sliding it in or out
of its bracket. See figure 22.
To change the controller position:
1. Loosen the thumbscrew.
2. Slide the controller to the desired position.
3. Tighten the thumbscrew.
V . C O M F O R T A D J U S T M E N T S
Figure 20. Armrest Height Adjustment
Figure 21. Swing-away Footrest
PULL OUT TO CHANGE ARMREST HEIGHT.
Figure 22. Controller Position
LOOSEN SETSCREW TO
CHANGE FOOTREST
LENGTH.
LOOSEN THUMBSCREW TO
CHANGE CONTROLLER POSITION.