Operation procedure – Panasonic AK-HC900P User Manual
Page 14

14
Operation Procedure
1
Turn on the power of each equipment.
2
Properly adjust the light for the ob-
ject.
3
Adjust the flange back of the lens, the
iris and the focus.
≥
Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
4
Adjust the white balance.
≥
This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥
The adjustment is necessary when the
lighting condition or brightness is changed.
≥
After adjusting the white balance once,
re-adjustment is not needed under the
same condition.
5
Adjust the black balance.
≥
This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥
The adjustment is necessary when the
ambient temperature is greatly changed
or at the change of season.
≥
After adjusting the black balance once,
re-adjustment is not needed under the
same condition.
6
Start shooting.
(After shooting, be sure to turn off the
power of each equipment connected.)