Pioneer VSX-D914 - Manual (Page 50)

Setting up the receiver 07
50
En
4 Specify the distance from the front left
speaker to your listening position using
and then press ENTER.
5 Use and to adjust the delay for
each channel in turn, pressing ENTER to go
to the next channel when you’re done.
Listen to the reference channel and use it to
measure the target channel. Stand facing the
two speakers with your arms outstretched
pointing at each speaker. Try to make the two
tones sound as if they are arriving simulta-
neously at a position slightly in front of you
and between your arm span.
The test tone for channel delay is output in the
same order as step 5:
After you have completed all the channels in
your speaker setup, the volume level returns
to normal and
COMPLETE , then RESUME
shows in the display.
• Using the MCACC system to set up your
speaker system will overwrite any
previous settings you had for the
STANDARD or ADVANCED SURROUND
modes.
Setting separate channel
levels for listening modes
• Default setting: 0 dB
In addition to the MCACC setup, you can also
set relative channel levels from the listening
position using the method below. Using
CH
SELECT (see tip below), it is also possible to
set separate channel levels for each of the
listening modes.
1 Press RECEIVER.
2 Press STANDARD or ADV. SURR.
(ADVANCED SURROUND).
R C
RS
LS
SW SB
+10
INPUT ATT FL DIMMER SR
DISC
MULTI CONTROL
SETUP
ENTER
TV CONTROL
RECEIVER CONTROL
SHIFT
VOL
DVD/LD TV/SAT DVR/VCR TV CONT
CD
TUNE
TUNE
ST ST
STANDRAD
LEVEL EFFECT
TEST TONE
CH SELECT
ADV. SURR STEREO SLEEP
INPUT
SELECT TV CH
DTV ON/OFF
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
DTV INFO REC MUTE
TV VOL
CD-R/TAPE TUNER RECEIVER
ENTER
REC STOP
HDD
CH CH
DVD
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
MCACC
SETUP
RECEIVER
VSX_D912.book.fm 50 ページ ２００３年１２月５日 金曜日 午前９時４３分