Panasonic EB-TX310 - Manual (Page 66)

Chapter 6
54 Additional Operations
Note: When you purchase your phone, Quiet mode has the
following settings: ring and key volume are muted; vibration alert
is on; ring and message alerts are set to General ring 1; and
warning tones are turned off.
Because you can modify the settings in both Normal mode and
Quiet mode, you could change the ring and key volume settings
in Quiet mode to maximum volume; change the ring and
message alerts to a melody; or turn on warning tones. However,
would still appear on your display. You could also mute ring
and key volumes in Normal mode. Be sure you know which
Alert mode you are in when you customize the tone settings.
You can quickly restore the default settings in both modes to
their original values by selecting Reset Defaults in the
Miscellaneous menu. See “Reset Defaults” on page 58 for all the
default settings.
To select either Normal or Quiet mode from standby, press and
hold
.
OR
1 From standby, press (MENU) to enter the Main Menu.
2 Press to scroll to Phone Settings. Press (OK).
3 Press to scroll to Alert Mode. Press (OK).
4 To change the setting, scroll to the other option (Normal Mode or
Quiet Mode) and press
(OK).
• If Quiet Mode is selected, is displayed.
Note: If you press and hold during a call, the phone
switches to Speakerphone.
Time Settings
Setting Date and Time
See “Setting Date and Time” on page 12.
Setting the Alarm
You can set two types of alarms: a scheduled, one-time alarm or a daily
alarm. You can program your phone for up to 10 alarms, each with its own
specific message display. Even if your phone is turned off at the time set
for an alarm, the phone turns itself on and the alarm is activated. This
allows you to reduce battery usage and also use your phone as an alarm
clock.
Caution: De-activate any alarms that would sound during the
time you are in a place where cellular phone use is prohibited—
for example, on an aircraft or in a hospital.