beautypg.com

The initial setup menu – Pioneer DVR-450H-S User Manual

Page 109

background image

The Initial Setup menu

109

En

14

Dual Mono
Recording

(Taiwan and
Philippines model)

L •

Select to record the left channel of an external dual
mono source when recording to DVD in Video mode,
to HDD with HDD Recording Format set to Video
Mode On, or in

LPCM

mode.

R

As above, but for right channel recording.

When recording dual mono audio to DVD in VR mode (except in

LPCM

mode), or to HDD with HDD Recording

Format set to Video Mode Off (except in

LPCM

mode), both audio channels are recorded and you can switch to the

one you want on playback.

Bilingual Recording

(Other)

A/L •

Record the left (A) channel of a bilingual source
when recording to HDD with HDD Recording Format
set to Video Mode On, to DVD in Video mode or in

LPCM

mode, from an external source.

B/R

As above, but for right (B) channel recording.

When recording bilingual audio to DVD in VR mode (except in

LPCM

mode), or to HDD with HDD Recording Format

set to Video Mode Off (except in

LPCM

mode), both audio channels are recorded and you can switch to the one you

want on playback.

DV Input

Stereo 1 •

Select to use the ‘live’ audio track (recorded during
the video shoot) from a camcorder that supports two
stereo audio tracks.

Stereo 2

Select to use the overdubbed audio track from a
camcorder that supports two stereo audio tracks.

Mix

Select one of the three settings to use a mix of the
two stereo audio tracks.

Audio Out

Dolby Digital Out

Dolby Digital •

Output a Dolby Digital signal when a Dolby Digital
source is being played.

Dolby Digital

PCM

Convert Dolby Digital sources to Linear PCM output.
Use if your connected equipment doesn’t have a
Dolby Digital decoder.

DTS Out

On •

Output a DTS signal when a DTS source is being
played.

Off

Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn’t have a DTS decoder. In this case, use the
analog audio outputs.

96 kHz PCM Out

96 kHz

48 kHz •

Convert 96 kHz digital audio sources to 48 kHz
output. Use if your connected equipment doesn’t
support 96 kHz sampling rate.

96 kHz

Output 96 kHz digital audio when a 96 kHz source is
being played.

Setting

Options

Explanation

DVR650HS_TLT_EN.book 109 ページ 2007年3月20日 火曜日 午後12時19分

This manual is related to the following products: