Onnections, Cont – Philips WVH111 User Manual
Page 12
12
C
ONNECTIONS
(
CONT
’
D
)
S
TEP
T
WO
: C
ONNECTING THE
S
ET
T
OP
B
OX TO
Y
OUR
TV
AND
/
OR
VCR
U
SING
C
OAXIAL
C
ABLE
(TV
ONLY
,
NO
VCR)
Connect one end of the sup-
plied coaxial cable to the RF OUT
jack on the back of the Set Top Box.
Connect the other end of the
coaxial cable to the TV’s ANTENNA IN
or RF IN jack.
Connect one end of the sup-
plied coaxial cable to the RF OUT jack
on the back of the Set Top Box.
Connect the other end of the
coaxial cable to the VCR’s ANTENNA IN
or RF IN jack.
Connect a second coaxial cable
(not supplied) to the ANTENNA OUT
or RF OUT jack of the VCR and to the
ANTENNA IN or RF IN jack of the TV.
U
SING
C
OAXIAL
C
ABLE
(TV
AND
VCR)
Choose the STEP TWO diagram that matches the cables you prefer.
S
MART
H
ELP
If you have an older model TV and there is no
place to plug in a coaxial cable, use a balun or
matching transformer (300 ohm to 75 ohm) obtainable
at an electronics store. Connect the coaxial cable to
the transformer and connect the transformer to the
VHF antenna screws on the TV. Set the TV to channel
3 and use the Set Top Box remote control to change
channels.
example of
transformer