Panasonic KX-TH102-C - Manual (Page 68)

Using a Cellular Phone with this Unit
68 For assistance, please visit http://www.panasonic.com/phonehelp
1
To put the land line call on hold, press
{
HOLD}.
2
To make a cellular call
– If you have registered only one
cellular phone, dial the phone
number, then press {CELLULAR}.
– If you have registered more than one
cellular phone, dial the phone
number, then press {CELLULAR}.
Select the desired cellular phone,
then press {SET}.
To answer a cellular call
Press {CELLULAR}.
3
To return to the land line call, press the
line button that is flashing on the base
unit.
L
The cellular call ends.
Cellular settings
Important:
L
You must register your cellular phone to
the base unit before programming.
Ringer settings for cellular calls
Y o
Ringer volume
You can change the ringer volume heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1
{
MENU} (center of joystick) i f
i {SELECT}
2
“Ringer for cell” i {SELECT}
3
“Ringer volume” i {SELECT}
4
Select the desired volume. (Default:
High) i {SAVE} i {OFF}
1
{ CELLULAR}
2
“Cellular setting” i {SET}
3
“Ringer volume” i {SET}
4
Select the desired volume. (Default:
High) i {SET} i {STOP}
Note for handset and base unit:
L
When the ringer volume is set to off for a
cellular line, “Ringer off” is not
displayed in standby mode and the
handset or base unit does not ring for
cellular calls.
Base unit
Handset
Base unit
TH102-C.book Page 68 Monday, March 13, 2006 2:41 PM