Panasonic KX-TH102-C - Manual (Page 24)

Preparation
24 For assistance, please visit http://www.panasonic.com/phonehelp
Setting the unit before
use
Display language
Y o
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Change language” i {SELECT}
3
Select the desired setting. (Default:
“English”)
4
Press the center of joystick to save. i
{
OFF}
Note:
L
If you select a language you cannot
read, press the center of joystick,
{#}{
1}{1}{0}{1}, and {SAVE} to
change the display language to English.
1
{ MENU} i h i {SET}
2
“Change language” i {SET}
3
Select the desired setting. (Default:
“English”) i {SET} i {STOP}
Note:
L If you select a language you cannot
read, press {MENU}, {#}{1}{1}{0}{1},
and {SET} to change the display
language to English.
Dialing mode
Y o
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
L
You only need to program this setting
once, using either the handset or base
unit.
1
{
MENU} (center of joystick) i h i
{
SELECT}
2
“Set tel line” i {SELECT}
3
“Set dial mode” i {SELECT}
4
Select the desired setting. (Default:
“Tone”) i {SAVE} i {OFF}
1
{
MENU} i h i {SET}
2
“Set tel line” i {SET}
3
“Set dial mode” i {SET}
4
Select the desired setting. (Default:
“Tone”) i {SET} i {STOP}
Handset
Base unit
Handset
Base unit
TH102-C.book Page 24 Monday, March 13, 2006 2:41 PM