beautypg.com

3 get started, Installation, Determine the signal strength – Philips SDV1121T/27 User Manual

Page 6: Connect to the tv, 4 set up the sdv1121t, For uhf reception, For vhf reception, Set up a digital tuner with this antenna, Set up a digital tuner with this antenna 6

background image

6

2

Turn the TV to the desired channel/

station. Move the dipoles in different

directions up and down until the

reception is achieved.

Note

To check the distance from the local TV

broadcast transmitters to your location, visit

www.antennaweb.org for more information.

Set up a digital tuner with this

antenna

You can install available channels with the digital

TV tuner. This automatic process is part of the

setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive

viewable channels.

Connect the antenna to a digital tuner.

If the signal strength is good enough, the

channels can be memorized in the tuner

automatically .

4 Set up the

SDV1121T

For UHF reception

1

Turn the TV to the desired channel/

station.

2

Point the antenna stand towards

the transmitter until the reception is

achieved.

Tip

For best results, ensure that the UHF antenna

faces towards the transmitter.

For VHF reception

1

Extend the telescopic dipoles to the

longest possible length.

EN