Philips DVD 931 - Manual (Page 20)

20
DVD736K IFU for /751 3141 016 19191
16:9
4:3
Letter Box
4:3
Pan Scan
Setup Menu
Video Out Setup
There are items included in VIDEO OUT PAGE
menu as TV DISPLAY, VIDEO OUTPUT, TV TYPE
VIDEO MODE, BRIGHTNESS,
CONTRAST, SATURATION.
1 Press STOP twice.
2 Press SYSTEM MENU to enter its menu.
3 Highlight the VIDEO OUTPUT SETUP item by
pressing the
34 keys.
4 Press OK.
Video output
In this menu, you can select the video output for
high quality picture.
1 Press the
34 keys to highlight VIDEO OUTPUT
in the VIDEO OUTPUT SETUP menu.
2 Press the OK key to open its submenu.
3 Press the
2 key to highlight the item of the
submenu.
4 Press the
34 keys to choose
an item.
➜ S-VIDEO: Video signals will send an output
from the S-VIDEO on the rear panel of the DVD
player.
➜ YCBCR: If your TV set is equiped with Y/CB/
CR input, you can choose for high quality picture.
5 Press OK.
6 Press the
1 key to return to the VIDEO OUTPUT
SETUP menu.
NOTE: Any selection will not influence the signal
output of composite video.
TV display
Select the aspect ratio of the TV to be
connected.
16:9 ➜ when you connect a wide-screen TV to
the DVD player.
4:3 LETTER BOX ➜ when you connect a
normal TV to the DVD player. Displays a wide
picture with bands displayed on the upper and
lower portions of the TV screen.
4:3 PAN SCAN ➜ when you connect a
normal TV to the DVD player. Displays the wide
picture on the whole TV screen with a portion
automatically cut off.
Setup the item as follows,
1 Press the
34 keys to highlight the TV DISPLAY
item in the GENERAL SETUP menu.
2 Press the OK key.
3 Enter its submenu by pressing
the
2 key.
4 Move the cursor by pressing the
34 keys to
highlight the selected item.
5 Press OK.
6 Press the
1 key to return to the VIDEO OUTPUT
SETUP menu.
TV type
Before viewing the DVD or VCD, ensure that the
PAL or NTSC setting of the system matches your
TV set.
1 Press the
34 keys to highlight
TV TYPE in the GENERAL
SETUP menu.
2 Press OK.
3 Enter its submenu by pressing the
2 key.
4 Move the cursor by pressing the
34 keys to
highlight the requisite item.
5 Press OK.
6 Press the
1 key to return to the VIDEO OUTPUT
SETUP menu.
NOTE: Choosing NTSC item indicates that the
player will output by NTSC system, Similarly, you
can sacquire PAL system by choosing the PAL item.
And the item MULTI means video output is
depending on the format of DVD or VCD discs.
DVD 736K/691 English IFU 2001.1.31, 10:33 AM 20
” «