Philips DVD 931 - Manual (Page 10)

10
DVD736K IFU for /751 3141 016 19191
Switching On
1 Switch on the TV and DVD player.
2 Set the TV to the correct Video IN channel. (eg.
EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc.
Please refer to to your TV owner’s manual for
detail)
➜ The player display lights and the default screen
appears on the TV.
3 If you are using an external equipment (eg. audio
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment owner’s manual for detail.
Preparation Operation
Basic Playback
1 Press POWER ON/OFF on the front panel.
2 Press OPEN/CLOSE on the front panel to open
disc loading tray.
3 Place the chosen disc in the tray, with the label
facing up.
4 Press OPEN/CLOSE again to close the tray.
➜ After recognizing this disc the player begin to
playback automatically.
POWER ON/OFF
Notes:
–
DVDs may have a region code. Your player will
not play discs that have a region code different
from the region code of your player.
–
If ‘Disc Lock’ is set to ON and the disc inserted
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see ‘Disc
Lock’).
General operation
Video control during playback
STOP DVD VCD CD
1 You can resume the play from the point at which
you stopped last time, if you just press the STOP
key once. It will start from the beginning if you
press the STOP key twice to stop playback.
PAUSE/STEP DVD VCD CD
1 To get a still picture, press PAUSE key during
playback.
2 To step forward to the next frame picture, press
PAUSE key again.
3 To resume normal playback, press PLAY.
SEARCH DVD VCD CD
1 To search the contents in fast speed, press the 2
or 1 for fast forward/backward searching.
2 Press the 1 or 2 again to increase the speed for
searching.
3 Press PLAY to return to the normal playback.
DVD 736K/691 English IFU 2001.1.31, 10:32 AM 10
” «