Polaroid SprintScan 45 - Manual (Page 17)

Diagrams of various SCSI configurations
The following diagrams illustrate different configurations.
Find the appropriate configuration for your hardware, and
follow the connection diagram and instructions.
Note: The shorter the SCSI chain, the better it will work. Use
SCSI cables that are only as long as necessary. The chain may
not exceed 19
1 / 2 ft. (6m) total.
The hard disk of the computer is internally terminated.
Therefore, you need to add the terminator to the scanner.
Place the terminator between the SCSI cable and the scanner.
Use the SCSI cable provided.
Place the terminated device at the end of the chain and do not
add any additional terminators. If any other external device
has an internal terminator, the terminator will have to be
removed according to the manufacturer’s directions. Use only
approved SCSI cables.
2-8
Scanner is the only
SCSI device
Scanner and another
SCSI device which is
internally terminated