Polaroid ADS-2000 - Manual (Page 23)

- 23 -
AV Setup
Alarm
To set the alarm time, use number buttons to input the desired start time in sequence
of hour, minute. Press the ► ◄ direction buttons to shift between AM and PM. Press
the ENT button to confirm.
Clock
To set the clock time, use number buttons to input the desired start time in sequence
of hour, minute. Press the ► ◄ direction buttons to shift between AM and PM. Press
the ENT button to confirm.
Note:
The function is active as long as the unit is continuously supplied with power. The unit
will automatically play the selected input signal at the set start time and enter standby
mode at the set end time each day.
Note:
Under AV mode, if there is no signal, the LCD screen will be blue screen.
In the DVD mode, the setup menus are the same as the menus in the AV mode,
you can go on with the setups according to the operations in the AV mode.