Polaroid ADS-2000 - Manual (Page 18)

- 18 -
TV Setup
Use the
▼▲ buttons to select the item you want to set.
Use the ► ◄ buttons to select the item and enter it.
Press the ▼▲ buttons to highlight the TV sign on the top of the menu, then press the
► button to enter the Video setup menu; press the ◄ button to return to the LCD
setup menu. Press the MENU button to exit the setup.
System
Use the
►,◄ buttons to select TV system: Secam L/L’, Pal D/K, Pal B/G, Pal I.
Channel
Use the
►, ◄ buttons to change the channel. You can select from channels 1 to 125.
Skip
When the
► button is pressed to turn the function ON, it will skip the current channel
Press ▼▲ to select channels.
When the ◄ button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Blue Screen
This function is only available in no signal input mode.
Use the
◄► buttons to turn the function ON or OFF.
Fine Tuning
Use the
▼▲ buttons to select Fine Tuning, and then press the ► ◄ buttons to tune
forward or backward from the current channel
Auto Memory
Use the
▼▲ buttons to select Auto Memory, press the ► button to enter auto memory
mode:
The auto memory will take a few minutes. The unit will search channels from the
lowest channel to the highest channel in the standard channel list. When tuning
operations are complete the unit will exit and store the channels by sequence in the
memory.
During tuning, press the
◄ button to exit the auto memory.