Polaroid ADS-2000 - Manual (Page 22)

- 22 -
AV Setup
Use the
▼▲ buttons to select, press the ► ◄ buttons to enter the select video mode.
Press the ▼▲ buttons to highlight the video sign on the top of the menu, then press
the ► button to enter the Clock menu; press the ◄ button to return to the LCD setup
menu. Press the MENU button to exit the setup.
Clock Setup
Press the MENU button and display the setup menu, press the ► ◄ buttons to select
the clock sign, the screen will display as below:
Use the ▼▲ buttons to select the item you want to set.
Use the ► ◄ buttons to enter the item or to select.
Press the ▼▲ buttons to highlight the Clock sign on the top of the menu, then press
the ► button to enter the LCD setup menu; press the ◄ button to return to the video
setup menu. Press the MENU button to exit the setup.
Timer
Use the
► ◄ direction buttons to select ON or OFF. This function allows you to set
the start time and end time of the desired signal source. No matter what mode the unit
is in, it will automatically start the playback of the desired signal source.
Select ON to activate the function; select OFF to disable the function.
Power on
To set the playback start time of the signal source, use number buttons to input the
desired start time in sequence of hour, minute. Press the ► ◄ direction buttons to
shift between AM and PM. Press the ENT button to confirm.
Power off
To set the playback end time of the signal source, use number buttons to input the
desired time in sequence of hour, minute. Press the ► ◄ direction buttons to shift
between AM and PM. When the playback of the signal source is over, the player will
enter standby mode. Press the ENT button to confirm.