Philips BTM177 - Manual (Page 4)

Step B Enjoy
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com PDCC-JW-0809
Playing a USB mass storage device
1
2
3
4
5
Make sure that your BTM177 is being powered on.
Press SOURCE repeatedly (or USB on the remote) to enter USB mode.
The LCD display shows USB.
Plug a compatible USB mass storage device to BTM177’s USB port marked .
If needed, use a suitable USB cable to connect between the device and BTM177’s USB port.
The device will automatically power on.
Press
ÉÅ
on your BTM177 to start playback.
Press
9
to stop playback.
Tip:
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
Operating a Bluetooth-enabled device via the system
1
2
3
4
5
Place a Bluetooth-enabled device for pairing within 10 meters from the system.
Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to select the
Bluetooth source.
Press and hold PAIRING on the top of the system or the remote control for more than 3
seconds.
Set the Bluetooth-enabled device to search for other available Bluetooth devices until it recognizes “PHILIPS
BTM177”.
Select “PHILIPS BTM177” and wait until you hear a double beep from the system and the Bluetooth icon
turns on.
➜
Enter “0000” when prompted for a keyword.
For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the system with the
PAIRING , and
9
buttons respectively.
●
For a paired A2DP device, you can enjoy music from it with the ÉÅ , ¡ / ™ , S/T and 9 buttons
via the system.
6
BTM177_12_QSG_Eng 2/28/08, 13:57 4