Philips CD485 - Manual (Page 39)

39 EN
Delete all old incoming messages
From the base
Press and hold in standby mode.
» All old messages are permanently
deleted.
From the handset
1
Select [Menu] > > [Delete all], then
press [OK] to confirm.
» The handset displays a confirmation
request.
2
Press [OK] to confirm.
» All old messages are permanently
deleted.
Note
• You can delete the read messages only. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press to pick up the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1
Select [Menu] > > [Msg quality], then
press [OK] to confirm.
2
Select the new setting, then press [OK]
to confirm.
» The setting is saved.
Note
• The sound quality can only be adjusted before
recording starts.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Select [Menu] > > [Ring delay], then
press [OK] to confirm.
2
Select a new setting, then press [OK] to
confirm.
» The setting is saved.
Note
• Ensure that the answering machine is switched
on before this feature can be applied.
Tip
• When you access the answering machine
remotely, you are recommended to set the
ring delay to[Toll saver] mode. This is a cost
effective way to manage your messages. When
there are new messages, the answering machine
picks up the call after 3 rings; When there is no
messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
• The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
English