Philips CD485 - Manual (Page 27)

27 EN
Set the sound profile
You can set the sound in the earpiece among
3 different profiles.
1
Select [Menu] > > [Sounds] > [My
sound], then press [OK] to confirm.
2
Select a profile, then press [OK] to
confirm.
» The setting is saved.
Display settings
You can adjust the brightness of the phone
display.
Set the display
1
Select [Menu] > , then press [OK] to
confirm.
2
Select [Display] > [Brightness], then
press [OK] to confirm.
3
Select an option, then press [OK] to
confirm.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1
Select [Menu] > > [Eco mode], then
press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
• When ECO is activated, the connection range
between the handset and the base station can
be reduced.
Silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is activated, your phone
does not ring or send any alerts or sound.
Note
• When you press to find your handset, your
phone still sends alert even when the silent
mode is activated.
1
Select [Menu] > > [Sounds] > [Silent
mode], then press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
» The setting is saved.
» is displayed.
English