Philips CD485 - Manual (Page 38)

38 EN
Restore the default announcement
1
Select [Menu] > > [Announcement],
then press [OK] to confirm.
2
Select [Record also] or [Answer only],
then press [OK] to confirm.
3
Select [Use default], then press [OK] to
confirm.
» The handset displays a confirmation
request.
4
Press [OK] to confirm.
» The default announcement is restored.
Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
Note
• If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to
the caller directly.
Note
• If the memory is full, the answering machine
switches to [Answer only] automatically. Delete
old messages to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
• To start/stop listening, press .
• To adjust the volume, press / .
• To play the previous message/Replay the
current message, press .
• To play the next message, press .
• To delete the current message, press .
Note
• No deleted messages can be recovered.
From the handset
Select [Menu] > > [Play], then press [OK]
to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
• Press [Back] to stop listening.
• Press [Option] to enter the options menu.
• Press 3 to increase/decrease the volume.
Delete an incoming message
From the base
Press when you listen to the message.
» The current message is deleted.
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to
confirm.
» The current message is deleted.