Panasonic CQ-C7405W - Manual (Page 13)

13
English
CQ-C7405W
Open/Eject
Press [u OPEN].
When a disc is already loaded, the disc will automatically
be ejected.
Close
Press [u OPEN].
Tilt
The display angle changes among 4 levels as follows
every time you hold down [u OPEN] (TILT) for 1 sec.
or more and release.
Note: The last selected
angle is memorized even
after turning off the power.
Notes:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
¡ The volume is not adjustable while an error or the
menu screen is present on the monitor.
¡ This unit memorizes individual volume levels for each
source. Make volume adjustments of each source
appropriately to prevent large volume fluctuation when
the source is changed.
q Up
w Down
Setting Range: 0 to 40
Default: 13
Volume off (down)
Press [MUTE].
Cancel
Press [MUTE] again.
Note: Volume-down range can be specified.
( a page 27)
OPEN DISP BAND
CQ-C7405W
TILT /SET/APM
SQ
MENU
TUNE
TRACK
MUTE
SBC-SW
FOLDER /P-SET/DISC
LIST
SOURCE PWR
/
VO L PUS H SEL / S RSW OW
D ・ M
OPEN DISP BAND
CQ-C7405W
TILT /SET/APM
SQ
MENU
TUNE
TRACK
MUTE
SBC-SW
FOLDER /P-SET/DISC
LIST
SOURCE PWR
/
VO L PUS H SEL / S RSW OW
D ・ M
General
Face Plate Motion (Open/Close, T
ilt)
(OPEN/CLOSE, TILT)
V
olume Adjustment
(VOLUME)
Temporar
y V
olume Off (Down)
MUTE (ATT: ATTENUATION)
Cautions
¡ To avoid damaging the face plate, do not push it
down or place objects on it while it is open.
¡ Do not pinch your finger or hand in the face plate.
¡ Do not insert foreign objects into the disc slots.
¡ For the following cases, the face plate automatical-
ly closes. Use caution not to catch your finger.
¡ After a lapse of 20 seconds
¡ When a disc is inserted
¡ When the face plate is removed ( a page 12)
¡ When ACC is set to off
TILT 1
TILT 2
TILT 3
OPEN
TILT OFF