beautypg.com

Preparation – Philips FW-C35 User Manual

Page 9

background image

3139 116 19372 (ENG)

9

A AM Loop Antenna

Connection

Connect the supplied loop antenna to
the AM ANTENNA terminal. Place the
AM loop antenna far away from the
system and adjust its position for the
best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna
to the FM AERIAL (FM ANTENNA)
300

terminal. Adjust the position of

the FM antenna for the best reception.

Outdoor Antenna
For better FM stereo reception,
connect an outdoor FM antenna to the
FM AERIAL (FM ANTENNA) 300

terminal using a 300

dipole wire.

FM ANTENNA 300

FM AERIAL 300

OR

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the colored wire to
+ and the black wire to -.

• Connect the left speaker to Front

terminal L, with the colored wire to
+ and the black wire to -.

• Clip the stripped portion of the

speaker wire as shown.

unlock

lock

12 mm

D Rear Surround

Speakers' Connection

(for models FWC3 & FWC35
only)

Connect the black (non-marked) wires
to the black REAR SURROUND
terminals and the colored (marked)
wires to the grey REAR SURROUND
terminals.

E Subwoofer Out

Connection

Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
subwoofer.

PREPARATION

F Connecting other

equipment to your
system

You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX IN terminals at the rear of the
system.

G AC Power Supply

After all other connections have been
made, connect the AC power cord to
the system and to the wall outlet.

Inserting batteries into the
Remote Control

• Insert the batteries (Type R06 or

AA) into the remote control as
shown in the battery compartment.

+

-

+

-

• To avoid damage from possible

battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.

pg 01-28/C3-35-30/37-Eng 1

12/14/99, 9:48 AM

9

This manual is related to the following products: