Pioneer PDR-609 - Manual (Page 37)

37
En
6 More recording features
English
Erasing a CD-RW
disc
Although more expensive than CD-R discs,
the great advantage of CD-RW is that the
discs can be erased and reused. Various
erase options are available depending on
whether the disc has been finalized.
A third, special option, erases (re-
initializes) the whole disc. This process
takes quite a long time to complete and
should be used for recovering damaged
discs, not for erasing tracks from a healthy
disc.
Caution!
Never switch off the power during CD-RW
erasing - your disc may become unusable.
If the message CHECK DISC appears any
time during any erase process, press
0,
take out the disc, clean it, then try the
erase command again.
Be sure to remove the disc from the
recorder before switching off the power,
otherwise the erase operation will not be
completed.
When a non-finalized
disc is loaded
1 Press ERASE.
The display shows
ERASE LAST? .
• Press
7 to cancel last track erase here.
2 Use the jog dial or press
4
and
¢ on the remote control
to change the erase option.
Switch between:
ERASE LAST? – erase just the last track
ERASE ALL? – erase all tracks
ERASE 02 –[ LAST TRACK ]? – erase
track 2 and all subsequent tracks
ERASE 03 –[ LAST TRACK ]? – erase
track 3 and all subsequent tracks
Keep turning the jog dial or press
4
and
¢ on the remote control to change
the number of tracks to erase.
3 Press
8 (6 on the front
panel) to start erasing.
The process takes just a few seconds.
During this time, the function indicator
lights.
4 Eject or finalize the disc.
You must eject, then re-insert the disc if
you want to record any new tracks. See
Finalizing a disc on page 26 if you have
finished all the recording and editing that
you want do to.
◊ÛB->?/
MONITOR
INPUT SELECTOR AUTO MANUAL
AUTO MANUAL
TRACK NO. WRITE
TIME
FINALIZE ERASE
SCROLL
1
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PUSH ENTER
R L ANALOG REC BALANCE
Legato Link Conversion CD TEXT
2
3