Pioneer PDR-609 - Manual (Page 20)

20
En
4 Getting Started
Synchro recording won't work if the source
is already playing!
The recorder goes into all-sync record
pause and the
SYNC indicator starts to
blink.
SYNC–ALL
SYNC
CD-R
The display shows the all-track sync mode,
with the
SYNC indicator blinking to show
that recording can start.
4 Play the source.
The recorder starts recording automati-
cally.
5 After recording all tracks from
the source, the recorder goes
into record-pause.
After the recorder encounters about five
seconds of continuous silence, it assumes
the end of the source has been reached and
goes into record-pause and the display
shows the
SYNC ALL message again.
Be careful: If the recorder detects
another signal or start ID (DAT or DCC) it
will start recording again!
• The recorder will enter record-pause if
the digital signal is interrupted for
more than 5 seconds—see Digital
signal interruptions on page 18.
6 Press
7 to finish recording.
After pressing
7, the display shows
PMA
REC while it records the track information
to the disc.
Note: If you find that synchro recording
does not seem to work, see the trouble-
shooting section on pages 40-42 for
possible remedies.
ENTER
CURSOR
MENU/
DELETE NAME MARK
SET CLEAR
DISPLAY
/CHARA
7
1 ¡
8
3
4 ¢
A B C D E F
G H I M N O J K L
P Q R S T U V W X Y Z
REC SYNCHRO
REPEAT RANDOM NAME CLIP
INPUT
SELECTER
FADER
SKIP PLAY SKIP ID
PROGRAM CHECK CLEAR
AUTO/
MANUAL
1 2 3
4 5 6
7 8 9
10/0 >10
SCROLL
TIME
Î
•
6
3
2
Recording all tracks
from a source
If you want to copy all the tracks from a
source, use this mode. Like the 1-track
synchro recording mode, the recorder
starts and stops automatically. When
recording from MD or CD, you can play the
source in either normal play mode, or
program play if you’d like the recorded
tracks in a different order to the original.
We do not recommend recording from a
DAT in program play mode—use the 1-
track synchro recording mode if you want
to record the tracks in a different order.
If you are recording from a noisy analog
source, such as a vinyl record, or from a
source with long quiet sections, the
recorder may not recognize the end of
tracks. In this case, you can still use this
mode, but it may be better to use manual
track numbering (see page 33).
1 Load a CD-R or CD-RW disc.
Check the display to make sure that there's
enough space on the disc for what you
want to record.
2 Press INPUT SELECTOR to
choose an input.
Pressing
INPUT SELECTOR repeatedly
switches the active input:
Analog - Optical - Coaxial
The recorder's display indicates the current
input.
3 Make sure that the source is not
playing, then press SYNCHRO
twice.
Press
SYNCHRO repeatedly to change the
recording mode:
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PUSH ENTER
R L ANALOG REC BALANCE
Legato Link Conversion CD TEXT
◊ÛB->?/
MONITOR
INPUT SELECTOR AUTO MANUAL
AUTO MANUAL
TRACK NO. WRITE
TIME
FINALIZE ERASE
SCROLL
1
2
3 6
SYNC–1
SYNC-1
SYNC–ALL
SYNC
SYNC–FINAL
SYNC
CD-R
CD-R
CD-R
O1 O1 OO:OO
FINALIZE
CD-R
1-track sync
All-track sync
All-track sync w/ finalization
Record-pause (no sync)