Philips PCA82CR - Manual (Page 26)

INSTALLING YOUR DRIVE
3 11
Figure 3-3 The “CD-ROM Device Driver Setup” Menu
4. Press to accept the default settings for
an express setup, or press “ ” to start a custom
setup.
Note: Custom Setup are only for users who want
to change the default installation
settings, such as the target directory or
the IRQ lines to be used by the available
IDE ports.
A “Compile Time” message will appear when the
setup is completed.
5. Reboot your computer.
If everything is okay, you can start using
your CD-ROM drive right away. Otherwise:
If the file MSCDEX.EXE is indicated not
found, make sure that you are using DOS 6.0
or above and your AUTOEXEC.BAT file has a
path statement similar to:
!"#