Philips PCA82CR - Manual (Page 15)

PHILIPS CD-ROM DRIVE USER’S MANUAL
1 2
Front-panel Stop/Eject, audio Play/Skip track
control
Compatibility with Windows 3.1, Windows 95 and
OS/2
Note: The use of the IDE/ATAPI interface means that you
can use your PC’s existing IDE interface to set
up the drive without the need for an additional
CD-ROM interface card.
1.2 Package Contents
Your complete CD-ROM package contains the following
items:
CD-ROM drive
Audio cable
IDE cable
software diskette
Four screws
This user‘s manual
1.3 System Requirements
IBM PC or compatible, with 80286 CPU or higher (a
80386 or higher is recommended)
3.5” floppy drive
One empty 5.25” horizontally oriented disk bay
One free IDE interface connector
MS-DOS 6.0 or later, Windows 3.1 or higher, or
OS/2 Warp 3.0 or above