5 system set up menu – Philips RT30A User Manual
Page 19
The list will show alarm events. Alarm record information can be
memorized up to 16, but only 8 can be displayed on the
MONITOR.
4. Press the -/+ button to view the next/previous page.
5. Press the
↓ button to choose the respective alarm.
6. To erase the alarm record information press the
CLEAR button. On the display panel, the "ALARM"
indication will also be cancelled.
POWER FAIL REVIEW
- You can review or clear the
POWER FAIL REVIEW while your are recording.
7. Press the
↓ button to select the POWER FAIL REVIEW
option and then press the
→ button.
The POWER FAIL REVIEW menu will appear.
Up to 8 Power fail information lines can be viewed.
8. To erase the power fail review select the respective
power fail review item and then press the CLEAR
button. The power fail review is erased. On the
display panel the "P.FAIL" indication will also be
cancelled.
BUZZER SELECT
- Allows you to set up the buzzer option.
You can select:
VIDEO LOSS : When the video signal fails, the buzzer
will operate.
ERROR MODE : When the VCR operates incorrectly,
the buzzer will operate.
TAPE END : When the VCR reaches the end of tape, the
buzzer will operate.
NO TAPE : When the tape is not inserted when you press
the PLAY, FF, REW, REC, STOP, EJECT button, the
buzzer will operate.
NO SAFETY TAB : When the safety tab is absent when
you press REC or the TIMER is programmed, the buzzer
will operate.
9. Press the
↓ button to select the BUZZER SELECT option
and then press the
→ button to enter the menu.
BUZZER SELECT menu will appear.
10. Press the
↓ to choose the respective option and then press the
→ button to select ON/OFF.
Note:
The TAPE END buzzer selection is only activated when
you have selected "RE-REC EVEN IF ALARM" or
"STOP IF ALARM (when there is no alarm)" in the
REPEAT function.
6.5
SYSTEM SET UP Menu
The SYSTEM SET UP allows you to personalise your system by
defining access control and system specification settings.
1. Press the MENU button. The main menu will
appear.
2. Press the
↓ button to select SYSTEM SET UP and press the
→ button to enter the menu.
The SYSTEM SET UP menu will appear.
SECURITY LOCK
- The security lock ensures that the VCR
tape cannot be removed. Note:
•
If the SECURITY LOCK is “ON”, the tape will eject only
if the eject button is pressed for more than 5 seconds.
•
If the auto eject mode is operational, the tape will just stop
when ended.
1-17
CLEAR
POWER FAIL
REVIEW MENU
< POWER FAIL REVIEW >
1 OFF 01/01/02 13 : 21 :10
ON 01/01/02 13 : 21 :20
2 OFF - -/- -/- - - - : - - : - -
ON - -/- -/- - - - : - - : - -
3 OFF - -/- -/- - - - : - - : - -
ON - -/- -/- - - - : - - : - -
4 OFF - -/- -/- - - - : - - : - -
ON - -/- -/- - - - : - - : - -
[ - ] [CLEAR END:MENU]
CLEAR
BUZZER SELECT MODE
< BUZZER SELECT >
VIDEO LOSS
ON
ERROR MODE
ON
TAPE END
ON
NO TAPE
ON
NO SAFETY TAB
ON
[
↓ →]
[END:MENU]
MENU
MAIN MENU
< MENU >
LANGUAGE
ENGLISH
CLOCK SET UP
RECORD MODE SET UP
TIMER RECORD ORD SET UP
REVIEW MODE
SEARCH SET UP
SYSTEM SET UP
[
↓ →]
[END:MENU]
< SYSTEM SET UP >
SECURITY LOCK
OFF
SHARPNESS
MEDIUM
TAPE SELECT
T-120
V-SYNC
ON
ELAPSED TIME: 00000H
[
↓ →]
[END:MENU]
SYSTEM SET UP MENU