Troubleshooting (windows 7) – Pioneer Driver Software For USB D/A Converter Functionality N-50 User Manual
Page 10

10
Troubleshooting (Windows 7)
When using Windows XP,
see page 4
; for Windows Vista,
see page 6
; for Mac OS X,
see page 14
.
1. No sound
In the event the N-50’s power is set to Standby, or the source input is set to something other
than Digital In USB, do not open your computer’s media player software. Change the input to
Digital In USB
before starting your computer’s media player.
1 Click on [Start]
t [Control Panel] t [System and Security].
2 Under [System], click on [Device Manager].
3 Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
4 Click on [Universal Serial Bus controllers], and confirm that [USB Composite
Device] is listed.
If the above devices are not listed as discribed, confirm that the N-50’s input source is set to Digital
In USB
, then either disconnect and reconnect the USB cable, or set the power to Standby then turn
it On again.
5 Click on [Start]
t [Control Panel] t [Hardware and Sound] t [Sound].
Procedure continues.
Procedure continues.