beautypg.com

Product identification, Safety information continued, Local codes – Procom QL300RYLA User Manual

Page 4: Unpacking, Product features safety pilot, Remote control system

background image

4

SAFETY INFORMATION
Continued

15. Turn off and unplug heater and let
cool before servicing. Only a

qualified service person should
service and repair heater.

16. Operating heater above elevations

of 4,500 feet could cause pilot
outage.

17. Do not operate heater if any log is

broken. Do not operate heater if a
log is chipped (dime-sized or
larger).

18. To prevent performance problems,

do not use Propane/LP fuel tank of
less than 100 lbs. capacity.

LOCAL CODES

lnstall and use heater with care.
F o l l o w a l l l o c a l c o d e s . I n t h e
absence of local codes, use the
latest edition of The National Fuel
Gas Code, ANSZ 223.1, also known
as NFPA 54*.
*Available from:
American National Standards
lnstitute, lnc.
1430 Broadway

New York, NY 10018

National Fire Protection
Association, lnc.

Batterymarch Park
Quincy. MA 02269

This heater is designed for vent-free
operation. State and local codes in
some areas prohibit the use of
vent-free heaters.

UNPACKING

1. Remove top inner pack.
2. Tilt carton so that stove is upright.
3. Remove protective side packaging.
4. Slide stove out of carton.
5. Remove protective plastic wrap.
6. Remove two self-tapping screws
on the screw , then lift and

pulling forward.

7. Remove log set by cutting plastic

ties.

8. Carefully unwrap log.
9. Check for any shipping damage. If

stove or log is damaged, promptly
inform dealer where you bought
stove.

PRODUCT FEATURES
SAFETY PILOT

This heater has a pilot with an
Oxygen Depletion Sensing (ODS)
safety shutoff system. The ODS/pilot
is a required feature for vent-free
room heaters. The ODS/pilot shuts off
the heater if there is not enough
fresh air.

PRODUCT IDENTIFICATION

Figure1- Vent Free LP/NG Gas Stove

Remote control SYSTEM

This fireplace has a remote transimit-
ter.This system requires three
batteries, and provides electric
power outlet to operate.

Stove Cabinet

Screen

Log

Heater Control

.

10.

Before using furniture polish, wax,

carpet cleaner, or similar products,
turn heater off. If heated, the
vapors from these products may
create a white powder residue
within burner box or on adjacent
walls or furniture.

11. This heater needs fresh air

ventilation to run properly. This
heater has an Oxygen Depletion
Sensing (ODS) safety shutoff
system. The ODS shuts down the
heater if not enough fresh air is
available. See

Air for Combustion

and Ventilation,

pages 5through 6.

If heater keeps shutting off, see

Tr o u b l e s h o o t i n g

, p a g e s 1 6

through 17.

12. Do not run heater:

Where flammable liquids or vapors

are used or stored.

Under dusty conditions.

13.Do not use this heater to cook

food or burn paper or other objects.

14. Do not use heater if any part has

been under water. lmmediately call

a qualified service technician to

inspect the room heater and to

replace any part of the control

system and any gas control which

has been under water.

This manual is related to the following products: