Polaroid CZA-05300B - Manual (Page 7)

EN-6
Notes on Handling Polaroid PoGo
™
ZINK Photo Paper
™
and Print Care
„ Keep the photo pack in a cool and dry place.
„ Do not leave the photo pack in a place where the temperature is extremely high (e.g.
a car or on the beach) for long periods.
„ If the photo pack has been kept in a place where the temperature is extremely high
or low, leave it at normal room temperature for an hour before starting to print.
„ When holding the paper, only touch the edges of the paper.
„ Do not touch or pull the print during printing.
„ Do not bend, fold or scratch prints and avoid touching the print surface.
„ Do not leave the prints in extremely hot locations (such as on hot sand, concrete or
close to a heating appliance).
„ Keep the prints in a cool and dry place.
„ Do not store the photo pack and prints in moist areas (store them in areas that have
less than 20% humidity).