Polaroid CZA-05300B - Manual (Page 20)

EN-19
Setting the Self-timer
This setting allows images to be captured with self-timer.
1. Toggle the e button to select the setting.
„ Each press of the e buttton moves the icon one step through the sequence and
displays it on the screen.
2. Compose your image in the LCD display.
3. Press the shutter button.
„ The self-timer LED flashes and the camera beeps (if beep is turned on). The
image will be captured after the preset time has elapsed.
„ The countdown is displayed on the LCD screen.
„ To cancel the self-timer during operation, press the OK button or shutter button.
The table below will help you to choose the appropriate self-timer mode:
„ The "10+2 sec." self-timer function cannot be used in the following capture modes: [ T ], [ U ],
[ / ], [ . ], [ + ] ,[ , ] and [ ].
„ The self-timer setting is automatically cancelled after an image is captured.
Self-timer mode Description
[
e 2s ] 2 sec. The image is captured about 2 seconds after the shutter is
pressed.
[
e 10s ] 10 sec. The image is captured about 10 seconds after the shutter is
pressed.
[
e 10+2s ] 10+2 sec. The first image is captured about 10 seconds after the shutter
button is pressed, and then a second image is captured 2 seconds
later. The 10+2 mode is convenient when capturing group images
in succession.