Printing – Polaroid CZA-05300B User Manual
Page 46

EN-45
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the e / f buttons.
Select the [Num of Prints] (up to 99) with the c
/ d buttons.
After selecting the desired image and printing
number, press the OK button to confirm.
4. Select [Exit] with the c / d buttons, and press
the OK button.
5. Select [Print] with the c / d buttons, and press
the OK button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection (i.e.
the printer hardware problem) between camera
and printer, [PRINT ERROR] will be displayed.
If an error is detected during the communication
(i.e. wrong setting on the camera) between camera and printer, [ERROR] will be
displayed.
The image printing may fail if the power to the camera is cut off.
For service, support and warranty information visit www.polaroid.com.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, USA.
100-0001
Num of Prints
00
OK:Enter
OK:Enter
PRINTING