Philips 6FF3FP - Manual (Page 5)

1.1 Safety precautions and
maintenance
Read and follow these instructions when
connecting and using your PhotoFrame:
• To protect your display from possible damage,
do not put excessive pressure on the LCD
panel. When moving your PhotoFrame,
grasp the frame to lift; do not lift the it by
placing your hand or fingers on the LCD
panel.
• Unplug the PhotoFrame if you are not going
to use it for an extensive period of time.
• Unplug the PhotoFrame if you need to clean
it with a slightly damp cloth. The screen may
be wiped with a dry cloth when the power
is off. However, never use alcohol, solvents or
ammonia-based liquids.
• Consult a service technician if the
PhotoFrame does not operate normally
when you have followed the instructions in
this manual.
• The casing cover should be opened only by
qualified service personnel.
• Keep the PhotoFrame out of direct sunlight
and away from stoves or any other heat
source.
• Keep the PhotoFrame dry. To avoid electric
shock, do not expose it to rain or excessive
moisture.
Introduction
Philips digital PhotoFrame can be placed either
vertically or horizontally to fit the photos on
display. You can place it somewhere in a room
for a continuous display by connecting it to the
mains power supply.
1. Important
• When positioning the PhotoFrame, make
sure the power plug and outlet are easily
accessible.
• To avoid the risk of shock or permanent
damage to the set, do not expose the
PhotoFrame to rain or excessive moisture.
1.2 Care of the PhotoFrame
1 Do not drop
PhotoFrame is a complicated electronic
device and cannot withstand shock from
being dropped.
2 Do not expose to moisture
PhotoFrame is neither moisture proof nor
moisture resistant. Exposing it to moisture
or liquid of any kind will very likely damage
your PhotoFrame.
3 Do not hit or scratch
The LCD panel of PhotoFrame is made of
glass and is therefore sensitive to abnormal
force and sharp edges.
4 Screen cleaning
Use only a dry soft cloth to clean your
screen.
Important
ENGLISH