1 lan configuration, 1 wireless settings, 1 ip filtering – Planet Technology ADW-4401 A/B User Manual

Page 27: 1 nat setting

3.6.1 LAN Configuration

Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure

the LAN port.

If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the

DHCP server runs on WAN side. To have this function working properly,

disable the NAT to run on router mode only, disable the DHCP server on the LAN

port, and make sure the routing table has the correct routing entry.

3.7.1 Wireless Settings

Go to Interface -> Wireless to setup the wireless parameters.

SSID

SSID is the identifier for the network. You can change the SSID. Only devices with

the same SSID can interconnect.

Channel ID

The channel number is used for wireless networking. The channel setting of the

wireless devices within a network should be the same.