Polaris Sportsman 9921454 - Manual (Page 73)

73
MAINTENANCE
Engine Oil
Oil and Filter Change
9. Place towels under the oil filter.
Using an oil filter wrench, turn the
filter counterclockwise to remove it.
10. Clean the filter sealing area on the
crankcase.
11. Lubricate the filter o-ring. Check to make
sure the o-ring is in good condition.
12. Install the new oil filter. After the filter
contacts the crankcase surface, turn it 1/2
turn by hand.
13. Remove the dipstick.
14. Add 1.9 liters of recommended oil.
15. Place the transmission in
PARK.
16. Start the engine. Allow it
to idle for 1-2 minutes.
17. Stop the engine.
18. Check for leaks.
19. Check the oil level. Add oil as
needed. Maintain the oil level in the
safe range. Do not overfill.
20. Discard used oil and filter properly.
Safe
Add Oil {
Safe
Range