Planar PT1710MX - Manual (Page 28)

24
17. Make contact with the “X” markings on the screen. Be sure your stylus or
finger is centered on each “X” point See Figure 6.
Figure 6
18. Your touchscreen is now calibrated and is ready for operation.
Uninstall Instructions
1. Click “start” in the Windows toolbar.
2. Select “Gunze TPDD” and select “TPDD Uninstall”.
3. Follow instructions.
4. Alternate method of uninstall is to use Windows “Control Panel”.
5. Select “Add or Remove Programs”.
6. Select “Gunze TPDD” and click “Change/Remove”.
7. Follow instructions.