The initial setup menu 13, Language settings, 96khz pcm out – Pioneer PRV-9200 User Manual

Page 101: Mpeg out, Osd language, Audio language, Subtitle language

The Initial Setup menu

101

• When playing a DTS audio CD, make sure that

Stereo is selected using the AUDIO button. See
Switching audio channels on page 43.

96kHz PCM Out

You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.

• Default setting:

96kHz

48kHz

If your AV amp/receiver (or other connected component)
is compatible with high sampling rate audio (88.2 / 96
kHz), set to

96kHz, otherwise set to 96kHz

48kHz.

Check the manual that came with the connected
component if you’re unsure whether it is compatible with
high sampling rate audio.

MPEG Out

You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.

• Default setting:

MPEG

PCM

If your AV amp/receiver (or other connected component)
is MPEG audio compatible, set to

MPEG, otherwise set to

MPEG

PCM. Check the manual that came with the

connected component if you’re unsure whether it is
MPEG compatible.

Language settings

OSD Language

• Default setting:

English

This sets the language of the on-screen menus and
displays.

Audio Language

• Default setting:

English

This setting is your preferred audio language for DVD
discs. If the language you specify here is recorded on a
disc, the recorder automatically plays the disc in that
language (although this depends on the

Auto Language

setting—see

Auto Language below).

Choose

Other if you want to specify a language other

than English or French (see

Selecting ‘Other’ languages

on page 102).

Tip

• You can switch between the languages recorded on

a DVD disc any time during playback using the
AUDIO button. (This does not affect this setting.)

Subtitle Language

• Default setting:

English