Panasonic KX-TCA155 - Manual (Page 45)

Troubleshooting
45
Troubleshooting
Troubleshooting
Problem Description and Solution
The PS does not work. • The battery is drained.
→ Charge the battery fully. (See “Battery Charge” on page 7.)
• The PS has been cancelled or the PS has not been
registered.
→ Consult your dealer.
• The power is OFF.
→ Turn it ON. (See “Power On/Off” on page 8.)
The PS does not ring. • Ringer volume is set to “ Off ”.
→ Adjust the ringer volume level. (See “Ringer Volume
Adjustment” on page 13.)
You cannot make/receive a call. • The PS is out of range or the Cell Station (CS) is busy.
→ Move closer to the CS or try again later.
• The radio channel is busy or a radio communication error
occurred.
→ Try again later.
You cannot dial. • The number which you dialled is restricted by the
Business Telephone System.
→ Consult your dealer.
• The key lock mode is ON.
→ To cancel the mode, press the Joystick for about 2
seconds. (See “Key Lock” on page 13.)
• The radio channel is busy or a radio communication error
occurred.
→ Try again later.
Noise is frequently heard. → Set the PS and CS away from other electrical appliances.
→ Move closer to the CS.
“ CS BUSY ” is displayed. • The Cell Station is busy.
→ Try again later.
“ PS Not Connected ” is
displayed.
• The called PS is out of range or the PS is power off.
→ Try again later.
The PS stops working during
operation. → Turn the power OFF and ON, then try again. (See “Power
On/Off” on page 8.)
→ Reinsert the batteries and try again. (See “Battery
Installation” on page 7.)