Technical specifications, Troubleshooting – Philips SNU6500 User Manual
Page 19
EN
19
Technical specifications
Radio
IEEE 802.11g
Radio Technology
Direct Sequence Spread Spectrum
(DSSS)
Orthological Frequency Division
Multiplexing (OFDM)
Antenna Type
Built-in antenna
Data Rate
1 / 2 / 5.5 / 6 / 9 / 11 / 12 / 18 / 24 / 36 /
48 / 54 / 72 / 96 / 108 Mbps
Host interface
USB specification version 2.0 (max.
108 Mbps) & 1.1 (max. 11 Mbps)
Power consumption
send / receive
Approx. 500 mA / 420 mA
Dimensions
(h x w x d)
22 x 79 x 93 mm
Weight
Approx. 55 g (adapter only)
Operating
Temperature
0 ~ 55°C
Storage
Temperature
–20 ~ 75°C
Humidity
5 ~ 90% non-condensing
Troubleshooting
Please, check the following troubleshooting items and our web site
www.philips.com/support before contacting our technical support.
Problem Possible
cause
Solution
ADAPTER INSTALLATION PROBLEMS
Your PC cannot find
USB Adapter not
Make sure the USB cable is securely
the Wireless USB
connected.
connected to the USB connectors of
Adapter or the net-
both the adapter and of your PC.
work driver does
not install correctly.
USB Adapter damaged Check for any hardware problems,
such as physical damage to the
adapter's connector.
USB Adapter or port Try to connect the adapter to
defective.
another USB port.
If this also fails, test your computer
with another USB device that is
known to operate correctly.
Conflicting network
If there are other network adapters
adapters.
in the computer, they may be causing
conflicts. Remove all other adapters
from the computer and test the
wireless adapter separately.
If it still does not work, try re-installing the wireless USB adapter 11g from the
original Installation CD. Restart your PC.