Philips 600/MMS 506 - Manual (Page 5)

5
English
French
German
Italian
Spanish
Dutch
Swedish
Finish
Polish
Turkish
Russian
Norwegian
Danish
Portuguese
Cable Connections (see illustration B)
Inputs
1. INPUT 1 : 5.1-channel
9 pin mini DIN cable to connect a 5.1-
channel audio-visual source.
2. INPUT 2 :
STEREO CHANNEL
3.5 mm stereo jack to connect a stereo
audio-visual source
3. INPUT 3 :
STEREO CHANNEL
2 x RCA jack to connect a stereo audio-
visual source.
Output
4. C
ENTER
To connect the center satellite speaker.
(DIN jack)
5. C
ENTER
To connect the center satellite speaker.
(3.5mm stereo jack)
6. R
EAR RIGHT
To connect the rear right satellite speaker.
7. R
EAR LEFT
To connect the rear left satellite speaker.
8. F
RONT RIGHT
To connect the front right satellite speaker.
9. F
RONT LEFT
To connect the front left satellite speaker.
10. AC
MAIN
Power cable to be connected to the AC
outlet.
Remote Control ( See Illustration A)
À STANDBY
To switch the speaker system into
ON
or
OFF
(=
STANDBY
) mode
Á MUTE
To switch the speaker system into mute
mode, and normal mode again
 MASTER VOLUME - / +
To adjust the master volume higher or lower
à FADE REAR / FRONT
To adjust the loudness of the rear and the
front satellite speakers
Ä BASS - / +
To adjust the bass level according your per-
sonal preference
Å TREBLE - / +
To adjust the presence of the higher tones
according to your personal preference
Æ FLAT
Removes any bass or treble boost applied
by the user.
Ç GAME/ MOVIE/ MUSIC
Choose from either the game, movie or mu-
sic button for optimal pre-set sound repro-
duction per genre
È INPUT 1/ INPUT 2/ INPUT 3
Make your choice of audio-visual source
selection. Two separate stereo input sources
and one 5.1-channel input source can be
connected to this multi-channel speaker
system.
Explanation
(Illustration page 3)
MMS506Final.p65 7/29/02, 2:12 PM 5